TE Engineering Main Page >> BIOJET™  
 
We are the exclusive Agency of “TE Engineering – Germany” in Egypt
TE Engineering offers and manufactures standard and customized Treatment Solution for Water, Waste Water and Industry , from Pre-Treatment to Tertiary Treatment.
BIOJET™

The high-performance Aerators

Low speed aerators are used for aeration and mixing. Research & Development (R&D) by TE Engineering.
This concept has been successfully installed in hundreds of projects throughout the world .
Aerators are used in:

Fixed installations for non-variable water levels

Two-street continuous flow application with four BIOJET™ ST 1500 aerators for nitrification and two BIOJET™ ST 1300 for de-nitrification of 6,800 m3/day, installed in Czech Republic.

 

Floating BIOJET™ aerator for variable water levels, in SBR-process

Excellent aeration using BIOJET™ ST 1000 in an Australian application.

 
 
One-tank BIOJET™ SBR system employing a ST 1300 aerator for use at up to 250 m3/day (dry weather) – 1,000 m3/day (wet weather) with additional P decomposition from less than 0.5 mg/l, with pH-correction.
 
 
BIOJET™ ST 2100 inside a large 23 m diameter tank for treating 600 m3/day of effluent with 2,000 mg/l BSB5. Result: BSB5 less than 15 mg/l. Application in Germany.
 
 
BIOJET™ ST 1000 installed in an underground tank in Australia.
 
 
Advantages

- Excellent content mixing during de-nitrification with    guaranteed liquid-flow of up to 0.3 m/sec

- High oxygen supply with high efficiency (kgO2/kWh)

- No remission of oxygen supply, even after decades

- Corrosion resistant thanks to manufacture in AISI 304L or
  AISI 316L-materials

- Either as fixed installation for a flow path or as floating   installation for SBR

- Only one turbine for mixing and aeration necessary

- Easy and simple maintenance without the need to empty   the tank

- No clogging

- High a-factor

- Long lifetime of more than 20 years – based on working   conditions of around 100,000 hours, as long as regular   maintenance is performed

- Low rotation of 35 – 120 rpms (depending BIOJET™ aerator

 
 
 
   
 
  TE Engineering
We are the exclusive Agency of “TE Engineering – Germany"
more>>
  Waste to Energy
Turning the waste problem into an energy solution..
more>>
  Görlich Meß- und Regeltechnik
A competent Supplier of sensors, measuring devices and system ..
more>>
  Füll Systembau
Dispensing Technologies for Ink, Paints, Chemical Industries and intermediate Bulkstorage.
more>>
  C.M.Bernardini
Oleochemicals, Oil & Fat Processing.
more>>